13
SERVICE WORK ON THE CHASSIS
13.17
Checking/correcting the fluid level of the hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch facing discs.
Do not use brake fluid.
–
Check the chain sliding piece for wear.
»
If the lower edge of the chain pins is in line with or below the chain sliding piece:
–
Change the chain sliding piece.
–
Check that the chain sliding piece is firmly seated.
»
If the chain sliding piece is loose:
–
Tighten the chain sliding piece.
Guideline
Remaining screws, chassis
L01489-01
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
x
M8
104
25 Nm
(18.4 lbf ft)