Table of Contents
Advertisement
11
SERVICE SCHEDULE
11.1
Additional information
Any further work that results from the required work or from the recommended work must be ordered separately and can be invoiced sepa-
rately.
11.2
Required work
Read out the fault memory using the KTM diagnostics tool.
Check the fuel pressure.
x
Check that the electrical equipment is functioning properly.
Change the engine oil and filter, clean the oil screens.
Check the brake discs. (
Check the front brake linings. (
Check the brake linings of the rear brake. (
Check the tire condition. (
Check the tire air pressure. (
Check the rear brake fluid level. (
Check the shock absorber and fork for leaks. Perform a fork service and shock absorber service as needed
and depending on how the vehicle will be used.
Check the chain, rear sprocket, engine sprocket, and chain guide. (
Check the chain tension. (
Check the brake lines for damage and leakage.
p. 108)
p. 111)
p. 115)
p. 123)
p. 125)
p. 112)
p. 99)
After 15,000 km (9,300 mi) / Every 15,000 km (9,300 mi)
x
x
(
p. 156)
p. 101)
Every 30,000 km (18,600 mi)
After 1,000 km (620 mi)
○
●
●
○
●
○
●
○
●
○
●
○
●
○
●
○
●
○
●
○
●
●
○
●
○
●
78
Every two years
Every year
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
- Quick Links:
- Adjusting the Chain Tension
Hide quick links:
Advertisement
Table of Contents
