13
SERVICE WORK ON THE CHASSIS
13.16
Checking the chain, rear sprocket, engine sprocket, and chain guide
Info
Chain wear is not always even, so you should check the setting at different chain
positions.
–
Tighten screw
Guideline
Screw, eccentric
Finishing work
–
Remove the rear of the motorcycle from the lifting gear. (
–
Check the rear sprocket and engine sprocket for wear.
»
If the rear sprocket and engine sprocket are worn:
–
Change the drivetrain kit.
100132-10
1
.
x
Info
The engine sprocket, rear sprocket, and chain should always be replaced
together.
M16
50 Nm
(36.9 lbf ft)
p. 89)
101