Light Switch; Hazard Warning Flasher Switch - KTM 2014 1290 Super Duke R EU Owner's Manual

6 CONTROLS
6.4.2

Light switch

6.4.3

Hazard warning flasher switch

The light switch
Possible states
L01407-10
The hazard warning flasher switch
The hazard warning flasher is used to indicate emergency situations.
Info
The hazard warning flasher can be activated or deactivated while the ignition is
switched on or up to 60 seconds after the ignition is switched off.
Only keep the hazard warning flasher activated as long as necessary as it depletes
the battery.
Possible states
L01406-11
1
is fitted on the combination switch on the left.
Low beam on – Light switch in position
and tail light are switched on.
High beam on – Light switch in position
beam and tail light are switched on.
Headlight flasher – Push the light switch into position
1
is fitted on the combination switch on the left.
Hazard warning flasher on – All four turn signals and the green turn signal
indicator lights in the combination instrument flash.
A
. In this position, the low beam
B
. In this position, the high
C
.
26