Back Up Configuration Or Log Files To A Server; Back Up Configuration Or Log Files To Your Computer - ZyXEL Communications GS1900-8 User Manual

From the Maintenance screen, display the Backup screen as shown next. Use this screen to back
up your current Switch configuration and log files to a server or as local files to your computer.
Figure 212 Maintenance > Configuration > Backup
The following table describes the labels under Backup.
Table 178 Maintenance > Configuration > Backup
LABEL
Method
Server IP
Content

32.3.2 Back up configuration or log files to a server

Follow the steps below to backup configuration or log files to a TFTP server.
1. In Method, choose TFTP.
2. In Server IP, enter the TFTP server IP address.
3. In Content, choose any one file type.
4. Click Apply to save a snapshot of your current configuration to the TFTP server.
OR
Click Cancel to discard the changes.

32.3.3 Back up configuration or log files to your computer

Follow the steps below to backup configuration or log files to your computer.
Chapter 32 Maintenance
DESCRIPTION
Choose HTTP to use the web configurator to backup the configuration. Alternatively,
choose TFTP to upload the snapshot to a TFTP server.
To upload the backup to a TFTP server, enter the TFTP server IP address.
Choose the type of file for backup. You can back up configuration files (running, startup, or
backup) or log files (flash or buffer).
There are three different types of configuration files:
Startup - this is the configuration used when the switch is booting up.
Running - this is the configuration when the switch is running.
Backup - this is saved in the Switch. If you make changes to the current configuration, and
there are problems, you can revert to the Backup configuration without having to restore a
new file.
GS1900 Series User's Guide
217