Eee - ZyXEL Communications GS1900-8 User Manual

The following table describes the labels in this screen.
Table 61 Configuration > Port > Port > Edit
LABEL
Port Edit
Port List
Port Name
State
Speed
Duplex
FlowCtrl State
Apply
Cancel

19.3 EEE

Use this screen to view Switch port Energy-Efficient Ethernet (EEE) settings and select ports for
configuration. Click Configuration > Port > EEE > EEE to open this screen.
Figure 95 Configuration > Port > EEE > EEE
Chapter 19 Configuration: Port
DESCRIPTION
Displays the list of port index numbers that are being configured.
Enter a descriptive name that identifies this port. The length of the name can be up to 32
alpha-numerical characters.
Note: Due to space limitations, the port name may be truncated in some web configurator
screens.
Select Enable to enable the ports or Disable to disable them.
Select the speed of the Ethernet connection on this port. The choices are Auto, 10M,
100M, and 1000M.
Select the duplex mode of the Ethernet connection on this port. The choices are Auto, Full,
or Half.
Select Enable to allow the device to manage data flow or Disable to have no data flow
management. A concentration of traffic on a port decreases port bandwidth and overflows
buffer memory causing packet discards and frame losses. Flow Control is used to regulate
transmission of signals to match the bandwidth of the receiving port.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide
103