Table 96 Configuration > Loop Guard (continued)
LABEL
Recovery Time
Apply
Cancel
23.2.2 The Loop Guard Port
Use this screen to view the Loop Guard Port. Click Configuration > Loop Guard > Port to open
this screen.
Figure 131 Configuration > Loop Guard > Port
The following table describes the labels in this screen.
Table 97 Configuration > Loop Guard > Port
LABEL
Port
Edit
Port
State
Action
23.2.3 The Port Edit Screen
Use this screen to configure a Loop Guard port. Click Configuration > Loop Guard > Port > Edit
to open this screen.
Chapter 23 Configuration: Loop Guard
DESCRIPTION
Enter the period (in seconds) for which a port will be kept disabled in the event of a loop is
detected (and the port action shuts down the port).
Click Apply to save the changes.
Click Cancel to discard the changes.
DESCRIPTION
Click Edit to change the properties of the port.
Displays the port index number.
Displays whether the port state is Enable or Disable.
Displays the action to take by the Switch. The options are Log, Shutdown Port, and
Shutdown and Log.
GS1900 Series User's Guide
138