1
2
1
Renault Scenic / Grand Scenic / Megane
1
27
1
28
1
1
29
Installing heater unit
Mount heater unit with Ejot stud on retaining
plate.
Copy hole patterns to positions 1 on bumper
mount.
Remove heater unit. Drill 9.1 mm hole in
bumper mount at position 1 and mount rivet
nut.
1 Flanged nut [3x] on stud bolt
2 Retaining plate
1
1 Mount M6x20 bolt, spring lockwasher
[2x each] on prepared rivet nuts
2 Bracket
2
WARNING!
On vehicles with front fog lights, position
bumper and check for freedom of movement
relative to bracket. If bracket makes contact,
cut off at marking and discard lower section.
Installing
heater unit
Installing
heater unit
Installing
heater unit
16