Table Of Contents - Furuno GP-150 Operator's Manual

TABLE OF
CONTENTS
FOREWORD............................................ iv
SYSTEM CONFIGRATION ....................... v
1. OPERATIONAL OVERVIEW
1.1 Control Description ..........................1-1
1.2 Turning On and Off the Power .......1-2
1.3 Adjusting Display Contrast and
Brilliance...........................................1-3
1.4 Selecting the Display Mode.............1-3
1.5 Icons ................................................1-6
2. TRACK
2.1 Enlarging/Shrinking the Display ......2-1
2.2 Selecting Display Orientation ..........2-1
2.3 Shifting the Cursor...........................2-1
2.4 Shifting the Display..........................2-2
2.5 Centering Cursor Position ...............2-2
2.6 Centering Own Ship's Position........2-2
2.7 Stopping/Starting Plotting and
Recording of Track .........................2-2
2.8 Erasing Track...................................2-3
2.9 Selecting Track Plotting Interval......2-4
2.10 Apportioning the Memory ..............2-5
2.11 Selecting Bearing Reference.........2-6
3. MARKS
3.1 Entering/Erasing Marks ...................3-1
3.2 Selecting Mark Shape .....................3-2
3.3 Connecting Marks
(selecting mark connection line) ....3-2
3.4 Entering Event Marks ......................3-3
3.5 Selecting Event Mark Shape ...........3-3
3.6 Entering the MOB Mark...................3-4
4. NAVIGATION PLANNING
4.1 Registering Waypoints.....................4-1
4.2 Editing Waypoints ............................4-5
4.3 Deleting Waypoints..........................4-5
4.4 Registering Routes ..........................4-6
4.5 Deleting Route Waypoints ...............4-7
4.6 Replacing Route Waypoints ............4-7
4.7 Deleting Routes ...............................4-8
5. STARTING FOR DESTINATION
5.1 Setting Destination ..........................5-1
5.2 Canceling Destination......................5-5
5.3 Erasing Route Waypoints (flags).....5-6
5.4 Finding Range and Bearing Between
Two Points......................................5-7
6. SETTING UP VARIOUS DISPLAYS
6.1 Selecting Data to Display on the
Data Display ...................................6-1
6.2 Selecting Position Format ..............6-2
6.3 Demo Display ..................................6-4
7. ALARMS
7.1 Arrival Alarm, Anchor Watch Alarm..7-1
7.2 Cross Track Error (XTE) Alarm .......7-2
7.3 Ship's Speed Alarm .........................7-3
7.4 Trip Alarm ........................................7-3
7.5 Water Temperature Alarm................7-4
7.6 Depth Alarm.....................................7-4
7.7 DGPS Alarm ....................................7-4
8. MENU SETTINGS
8.1 GPS Menu .......................................8-1
8.2 Selecting Units of Measurement .....8-4
8.3 Mark, Character Size and Brilliance 8-5
8.4 Settings for Connection of
Navigator ........................................8-6
8.5 Receiving Data from Personal
Computer ....................................8-8
8.6 WAAS/DGPS Settings...................8-10
8.7 Displaying GPS Monitor Displays .8-13
9. MAINTENANCE & TROUBLESHOOTING
9.1 Clearing the Memory .......................9-1
9.2 Preventive Maintenance..................9-2
9.3 Error Messages ...............................9-2
9.4 Troubleshooting ...............................9-4
9.5 Diagnostic Tests ..............................9-5
APPENDIX
MENU TREE......................................... A-1
DIGITAL INTERFACE
(IEC 61162-1 EDITION 2 (2000-07)).... A-4
TIME DIFFERENCES......................... A-21
GEODETIC CHART LIST................... A-22
LORAN C CHAINS............................. A-23
DECCA CHAINS................................. A-24
PARTS LIST ....................................... A-25
SPECIFICATIONS ............................... SP-1
INDEX................................................... IN-1
iii