Furuno GP-80 Installation Manual
  1. Manuals
  2. Brands
  3. Furuno Manuals
  4. GPS
  5. GP-80
  6. Installation manual

Furuno GP-80 Installation Manual

Furuno gps receiver user manual
Hide thumbs Also See for GP-80:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual
Back
INSTALLATION MANUAL
GPS NAVIGATOR
GP-80
1. EQUIPMENT LIST ............................................................................................ 1
2. DISPLAY UNIT .................................................................................................. 2
3. ANTENNA UNIT ................................................................................................ 3
4. WIRING ............................................................................................................. 5
5. INITIAL SETTINGS ........................................................................................... 7
6. OPTIONAL DGPS ........................................................................................... 21
Packing ListS AND INSTALLATION MATERIALS
OUTLINE DRAWINGS
INTERCONNECTION DIAGRAM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GP-80 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Furuno GP-80

Summary of Contents for Furuno GP-80

  • Page 1 Back INSTALLATION MANUAL GPS NAVIGATOR GP-80 1. EQUIPMENT LIST ... 1 2. DISPLAY UNIT ... 2 3. ANTENNA UNIT ... 3 4. WIRING ... 5 5. INITIAL SETTINGS ... 7 6. OPTIONAL DGPS ... 21 PACKING LISTS AND INSTALLATION MATERIALS...
  • Page 2 Printed in Japan Printed in Japan All rights reserved. All rights reserved. PUB.No. IME-43740-Q1 PUB.No. IME-43740-Q1 ( ( TENI TENI ) ) GP-80 GP-80 Your Local Agent/Dealer Your Local Agent/Dealer FIRST EDITION : FIRST EDITION : SEP. SEP. 1995 1995 : : OCT.
  • Page 3 SAFETY INSTRUCTIONS WARNING Do not work inside the equipment unless totally familiar with electrical circuits. Hazardous voltage which can cause electrical shock, burn or serious injury exists inside the equipment. Turn off the power at the mains switchboard before beginning the installation. Post a sign near the switch to indicate it should not be turned on while the equip-...

  • Page 4: Equipment List

    EQUIPMENT LIST Standards Name GPA-017S Antenna Unit GPA-018S GPA-019S GPR-020 Display Unit GPR-020 Installation CP20-01900 Materials CP20-01920 Spare Parts SP20-00500 Options Name Flush Mount Kit S Flush Mount Kit F Antenna Cable Set Right Angle Antenna Base L-Type Antenna Base Handrail Antenna Base Mast Mount Kit Cable Assy...

  • Page 5: Display Unit

    DISPLAY UNIT The display unit can be installed with either of four methods as shown below. Refer to the outline drawing page D-2, D-3, and D-4. Locate the unit away from exhaust pipes and vents. The mounting location should be well ventilated. Mount the unit where shock and vibration are minimal.

  • Page 6: Antenna Unit

    ANTENNA UNIT Mounting Install the antenna unit referring to the installation diagram on page D-4. When selecting a mounting location for the antenna unit, keep in mind the following points. Select a location out of the radar beam. The radar beam will obstruct or prevent reception of the GPS satellite signal.
  • Page 7 3. ANTENNA UNIT How to attach the N-P-8DFB connector Outer Sheath Armor Inner Sheath Shield Cover with heat-shrink tubing and heat. Clamp Gasket (reddish brown) Trim shield here. Insulator Trim aluminum tape foil here. Clamp Nut Solder through the hole. Remove outer sheath and armor by the dimensions shown left.

  • Page 8: Wiring

    WIRING The figure below shows the connection of cables on rear of display unit. Antenna Unit GPA-019S GPA-018S GPA-017S 20cm External Equipment CAUTION Ground the receiver to prevent loss of sensitivity and mutual interference. Rear of Display Unit DATA1 DATA2 DATA3 DATA4 –...
  • Page 9 4. WIRING Grounding The display unit contains several CPUs. While they are operating, they radiate noise, which can interfere with other radio equipment. Ground the unit as follows to prevent it. The grounding wire should be 1.25sq or larger. The grounding wire should be as short as possible. External Equipment The DATA1, DATA2, and DATA3 ports are used to connect an external equipment such as autopilot, remote display, navigation equipment.

  • Page 10: Initial Settings

    SRAM Internal Battery BEACON RCVR INSTALLED DATA #3: LOG PULSE OUTPUT 3. At the GP-80, press [MENU ESC], [8] and [1]. Confirm that "BEACON OK" is displayed. DGPS Setup The default setting is "manual". Automatic DGPS setup The GR-800 can automatically select optimum reference station by feeding it position data.

  • Page 11: Manual Dgps Setup

    6. Press the [MENU ESC] key. Manual DGPS setup Enter four digit ID number, frequency and baud rate of station, referring to the DGPS list in the GP-80 operator's manual. 1. Press [MENU ESC] [9] and [7] to display the DGPS SETUP menu. "...
  • Page 12 You can convert a Loran Plotter to a GPS Plotter with position data from the GP-80. Before selecting data to output, confirm what data the external equipment requires. Output necessary data only.
  • Page 13 5. INITIAL SETTINGS Data format and data output availability Output data sentence of IEC 61162-1 and NMEA 0183 Ver. 1.5/V2.0. AAM: Waypoint arrival alarm APB: Autopilot sentence B magnitude of cross track error, direction to steer, arrival alarm, bearing to waypoint ("Heading to steer to destination waypoint data"...
  • Page 14 $--TLL, 00, 3445.678, N, 13521.234, E, abcd, 121530, T, R*A5<CR><LF> Target number...not used b, c: Latitude d, e: Longitude Target name...not used UTC...not used Target status...not used Reference target...not used checksum FURUNO proprietary sentences 5. INITIAL SETTINGS h i j...
  • Page 15 A rate of operation exceeding 100% is impractical. For better performance, the rate of operation should be less than 90%. When the external equipment cannot display correct data input from the GP-80, the rate of operation should be lowered. For example, set a rate of operation less than 60% for the Temperature Indicator TI-20.
  • Page 16 DATA 1 output setting 1) Press [MENU] [9] and [3]. The DATA 1, 3 OUTPUT SETUP menu appears. Data Fmt. Output Data DATA3. Log Pulse ENT : Enter Figure 5-1 DATA 1, 3 OUTPUT SETUP menu " 2) Press to select Data Fmt. 3) Press to select V1.5, V2.0 or IEC.

  • Page 17: Data 2 Output Setting

    5. INITIAL SETTINGS DATA 2 output setting 1) Press [MENU] [9] and [4]. The DATA 2 OUTPUT SETUP menu appears. NMEA Fmt. Output Data ENT : Enter Figure 5-2 DATA 2 OUTPUT SETUP menu 2) Follow the procedure for setting DATA 1 output. DATA 3 output setting The DATA 3 can output NMEA 0183 (V1.5/V2.0) /IEC 61162-1 data or log pulse by selecting inner jumper wire.
  • Page 18 Setting DATA 4 to Data Output 1) Press [MENU] [9] and [5]. The DATA 4 I/O SETUP menu appears. DATA 4. Level To Next Page ENT : Enter Figure 5-3 DATA 4 I/O SETUP menu " 2) Press to select Level. 3) Press to select level of external equipment;...
  • Page 19 5. INITIAL SETTINGS Setting DATA 4 to “COM.” (general data) Waypoints and Routes data can be received from a personal computer, through the DATA 4 port. 1) Press [MENU] [9] and [5]. " 2) Press to select Level. 3) Press to select level of personal computer;...
  • Page 20 15) Press the [ESC] key. Setting DATA 4 to DGPS An external DGPS receiver can be connected to the DATA 4 port. Follow the procedure below to setup the GP-80 according to the specifications of the DGPS receiver. 1) Press [MENU] [9] and [5].

  • Page 21: Interface Documentation

    MJ-A6SRMD RD-H RD-C Load Requirements Isolation: Input Impedance: 470 Max. Voltage: Threshold: Input Sentence is described on page 11. 20P8147 MJ-A6SRMD FL13 FL14 FL12 CR13 FL11 1SS226 opto coupler 3mA (In case of FURUNO device talker connection) SN75ALS172 2.2K PC-400...
  • Page 22 MJ-A6SRMD RD-H RD-C Load Requirements Isolation: Input Impedance: 470 Max. Voltage: Threshold: Input Sentence is described on page 8 and 9. FL10 SN75ALS172 PC-400 CR14 1SS226 opto coupler 3mA (In case of FURUNO device talker connection) 5. INITIAL SETTINGS 2.2K...
  • Page 23 5. INITIAL SETTINGS "DATA3" Port The output signal of this port is changed by jumper JP4 and JP5 between data out (IEC 61162-1/NMEA 0183 Ver. In case of data out, the same data of DATA1 port (#1 & #2) is output. Output Schematic Diagram (Talker) 20P8147 DATA3...

  • Page 24: Optional Dgps

    RS-422* TD-B RD-A RD-B NP Board Open When the GP-80 is connected with Beacon Receiver GR-80, do the setting as follows. Signal level First Bit Parity Bit Stop Bit Communication Speed *1: Coincide with the setting of the Beacon Receiver GR-80.
  • Page 25 6. OPTIONAL DGPS " 7) Press to select First Bit. 8) Press to select first bit; MSB or LSB. " 9) Press to select Parity. 10) Press to select parity bit; EVEN, ODD or NONE. " 11) Press to select Stop Bit. 12) Press to select stop bit;...
  • Page 26 ＰＡＣＫＩＮＧ　ＬＩＳＴ ＰＡＣＫＩＮＧ　ＬＩＳＴ ＰＡＣＫＩＮＧ　ＬＩＳＴ ＰＡＣＫＩＮＧ　ＬＩＳＴ GP-80-**-0/0-HK GP-80-**-0/0-HK GP-80-**-0/0-HK GP-80-**-0/0-HK N A M E ユニット ユニット ユニット ユニット UNIT UNIT UNIT UNIT 空中線部 ANTENNA UNIT 空中線部 ANTENNA UNIT 空中線部 ANTENNA UNIT 受信演算部 DISPLAY UNIT 予備品 予備品 SPARE PARTS SPARE PARTS 予備品 予備品...
  • Page 27 A - 2...
  • Page 28 GP-80,GP-90,SC-55,GP-3500/F       工事材料表 工事材料表 工事材料表 工事材料表 GP-1850,GP-1650,FA-100,GP-1640/F     SC-60/120,GD/GP-280/680/380 INSTALLATION MATERIALS 番 号 名  称 NAME ｱﾝﾃﾅｹｰﾌﾞﾙ組品 ANTENNA CABLE ASSY. ｹｰﾌﾞﾙ組品 CABLE ASSY. （略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.） （略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.） （略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.）...
  • Page 29 工事材料表 工事材料表 工事材料表 工事材料表 INSTALLATION MATERIALS 番 号 名  称 NAME 変換ｹｰﾌﾞﾙ組品 CONVERT CABLE ASSY. ﾋﾞﾆｰﾙﾃｰﾌﾟ VINYL TAPE ｺﾈｸﾀ(N) CONNECTOR 絶縁ﾃｰﾌﾟ SELF-BONDING TAPE （略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.） （略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.） （略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.） （略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.）...
  • Page 30 D - 1 Feb. 19, '03...
  • Page 31 D - 1A Feb. 19, '03...
  • Page 32 D - 1B Feb. 19, '03...
  • Page 33 D - 1C...
  • Page 34 D - 2...
  • Page 35 D - 3...
  • Page 36 D - 4...
  • Page 37 S - 1 N-J-3 N-P-8DFB 0.2m...

This manual is also suitable for:

Gp-90

Table of Contents