Furuno GP-150 Operator's Manual page 79

DBT - Depth below transducer
DPT - Depth
$--DPT,x.x,x.x,x.x*hh<CR><LF>
|
|
|
|
+---------------- 1
1. Water depth relative to trancsducer, in meters
2. Offset from transeducer, in meters(see notes 1 and 2)
3. Maximum range scale in use
4. Checksum
NOTE1 "positive"=distance from transeduser to water-line.
"-"=distance from transducer to keel.
NOTE2 For IEC applications the offset should always be applied
so as to provide depth relative to the keel.
$--DBT, x. x, f, x. x, M, x. x, F*hh<CR><LF>
1. Water depth, feet
2. Water depth, m
3. Water depth, fathoms
4. Checksum
| | |
| | +----- 4
| +--------- 3
+------------ 2
APPENDIX
4
3
2
1
AP-11