Desktop And Underside Of Table Mount - Furuno GP-33 User Manual

9. INSTALLATION
• Locate the unit away from equipment which generates electromagnetic fields such
as a motor or generator.
• Allow sufficient maintenance space at the sides and rear of the unit and leave suf-
ficient slack in cables, to facilitate maintenance and servicing.
• Observe compass safe distances noted on page ii to prevent interference to a mag-
netic compass.
• Locate the unit away from direct sunlight. An LCD may black out if it is exposed to
direct sunlight for a long time.
• The optimal viewing distance is 0.6 m. Select a suitable mounting location consid-
ering the distance.
9.2.2

Desktop and underside of table mount

1. Unscrew knobs to dismount the receiver unit from the hanger.
2. Prepare four pilot holes (for 5x20 self-tapping screws) at the mounting location.
3. Fix the hanger to the mounting location with four self-tapping screws (5x20, sup-
plied).
4. Attach cables to the back of the receiver unit (see section 9.4).
5. Set the receiver unit to the hanger, and fasten knobs to fix it.
9-2
Receiver Unit
Self-tapping Screw
(5x20, 4 pcs.)
Knob
Hanger