Configuring Port Mirroring - D-Link DGS-3324SRi User Manual

High-density layer 3 stackable intelligent gigabit ethernet switch
Hide thumbs Also See for DGS-3324SRi:
Table of Contents

Advertisement

D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
Parameter
State <Enabled>
Speed/Duplex
<Auto>
Flow Control
Learning

Configuring Port Mirroring

The Switch allows you to copy frames transmitted and received on a port and redirect the copies to another port.
You can attach a monitoring device to the mirrored port, such as a sniffer or an RMON probe, to view details
about the packets passing through the first port. This is useful for network monitoring and troubleshooting
purposes. To view the Setup Port Mirroring window, click Port Mirroring in the Configuration folder.
To configure a mirror port:
Description
Toggle the State <Enabled> field to either enable or disable a given port.
Toggle the Speed/Duplex <Auto> field to either select the speed and
duplex/half-duplex state of the port. Auto – auto-negotiation between 10 and
100 Mbps devices, full- or half-duplex. The Auto setting allows the port to
automatically determine the fastest settings the device the port is connected
to can handle, and then to use those settings. The other options are auto,
10M/Half, 10M/Full, 100M/Half, 100M/Full, 1000M/Full_M (Master), and
1000M/Full_S (Slave). There is no automatic adjustment of port settings with
any option other than Auto.
Displays the flow control scheme used for the various port configurations.
Ports configured for full-duplex use 802.3x flow control, half-duplex ports use
backpressure flow control, and Auto ports use an automatic selection of the
two. The default is Disabled.
Enable or disable MAC address learning for the selected ports. When
Enabled, destination and source MAC addresses are automatically listed in
the forwarding table. When learning is Disabled, MAC addresses must be
manually entered into the forwarding table. This is sometimes done for
reasons of security or efficiency. See the section on Forwarding/Filtering for
information on entering MAC addresses into the forwarding table.
Figure 4- 3. Setup port Mirroring window
26

Advertisement

Table of Contents
loading

Table of Contents