Cub Crafters CC18-180 Pilot Operating Handbook page 419

CUB CRAFTERS
CC18-180
9.14.1.2 SYSTEM CAPABILITIES
The GTN system and associated navigation interface in
this aircraft have the following capabilities, in addition to
the core multifunction display capability:

VHF Communication Radio

Primary VHF Navigation

Primary GPS Navigation
9.14.1.3 GPS/SBAS TSO-C146c CLASS 3 OPERATION
The GTN complies with AC 20-138A and has airworthiness
approval for navigation using GPS and SBAS (within the
coverage of a Satellite Based Augmentation System
complying with ICAO Annex 10) for IFR en route, terminal
area, and non-precision approach operations (including
those approaches titled "GPS", "or GPS", and "RNAV
(GPS)" approaches). The Garmin GNSS navigation system
is composed of the GTN navigator and antenna, and is
approved for approach procedures with vertical guidance
including "LPV" and "LNAV/VNAV" and without vertical
guidance including "LP" and "LNAV," within the U.S.
National Airspace System.
The Garmin GNSS navigation system complies with the
equipment requirements of AC 90-105 and meets the
equipment performance and functional requirements to
conduct RNP terminal departure and arrival procedures
and RNP approach procedures without RF (radius to fix)
legs. Part 91 subpart K, 121, 125, 129, and 135 operators
require operational approval from the FAA.
The Garmin GNSS navigation system complies with the
equipment requirements of AC 90-100A for RNAV 2 and
RNAV 1 operations.
Issued: 02/05/13
Date of revision: N/A
SECTION 9.14
SUPPLEMENTS-GTN 635
REPORT TC10000AFM
Page number 9-14-3