CUB CRAFTERS
CC18-180
To operate the Count Down timer:
1. Press the FUNC key until "COUNT DOWN" is
displayed.
2. Press CRSR and use the 0-9 keys to set the initial
time. All digits must be entered (use the 0 key to
enter leading zeros).
3. Press START/STOP to count down.
4. Press START/STOP again to pause the timer.
5. When the Count Down timer expires, the words
"COUNT DOWN" are replaced with "EXPIRED"
and the time begins counting up and flashing.
6. Press CLR to reset the timer to the initial time
value.
Issued: 5/31/05
Date of revision: 12/06/05
SECTION 9.3
SUPPLEMENTS-GTX 327
REPORT TC10000AFM
Page number 9-3-11