Cub Crafters CC18-180 Pilot Operating Handbook page 223

CUB CRAFTERS SECTION 9.4
CC18-180 SUPPLEMENTS-EDM-800
9.4.7.3 Modes
The EDM has three different operating modes:
Automatic, Manual, and two LeanFind sub modes. When
you first turn on the power the EDM starts in the Manual
mode, but will enter the Automatic mode after one
minute. The Automatic mode provides you with engine
monitoring information for the majority of flight conditions.
To adjust the mixture, use the LeanFind mode. To
display specific parameters, use the Manual mode. In
both the Automatic and Manual modes the display shows
a bar graph of EGT and CHT for each cylinder.
REPORT TC10000AFM
Issued: 5/31/05
Date of revision: 12/06/05 Page number 9-4-11