Cub Crafters CC18-180 Pilot Operating Handbook page 368

SECTION 9.11
SUPPLEMENTS-WIPAIRE 2100A
AMPHIBIOUS FLOATS
Check the position of the landing gear selector prior to re-
setting the circuit breaker and ensure that the landing
gear selector is in the correct position.
DO NOT ATTEMPT TO LAND ON WATER UNLESS
ALL FOUR WHEELS ARE IN THE RETRACTED
9.11.7.5 FUEL QUANTITY INDICATORS
To determine the fuel quantity on the ground, use the fuel
quantity indication for level flight. Fuel indications in the
water will vary depending on the angle at which the
aircraft is floating. Generally, using the markings for level
flight will ensure that the amount of fuel available is
greater than what is shown on the gauges. However, the
additional weight of this fuel must be taken into account
for weight and balance.
9.11.7.6 BILGE PUMP
There is a bilge pump that is stowed in the hatch in the
right float. Any water that has accumulated in the floats
may be emptied out by removing the rubber plugs and
using the pump to draw the water out. Make sure that no
one is standing in the way of the water stream.
REPORT TC10000AFM
Page Number: 9-11-66
WARNING
POSITION
Date of Revision: 009/15/15
CUB CRAFTERS
CC18-180
Issued: 5/31/05