Montigo H42DF Installation & Maintenance Manual page 15

45° Corner Installation.
Attach an PEL-45 (45° elbow) directly onto the flue collar. Cut
the PXT-20 to suit, and attach it to the PEL-45. Slide the fireplace
into position and attach to the termination.
Figure 14. Corner installation. (NG Models Only)
XG0148 - 151123
Installation
45° or less Corner Installation.
Use an PTO-3 termination and an PFL-1 or PFL-2/PFL-2 (12" or
24" compressed length) and a frame, if appropriate. Flex may
be turned to obtain desired degree of angle required but must
not exceed 45°.
Heat Shield
PXT-18
PEL-45 Elbow
PEL-90 Elbow
Figure 14a. Flex installation. (NG Models Only)
Note: Through the wall venting kits are also available for both
the Straight and the Corner Installation. The Kit includes a heat
shield, a PFL-12 (f/f) flexible pipe, and a termination with or
without a mounting frame.
H*42DF Indoor Gas Fireplace
Heat Shield
Page 15