Temporary Tone Dialing; Hold; Equalizer - AT&T TL92271 User Manual

Telephone operation
Options while on calls

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
During a call:
Press TONE .
1.
2. Use the dialing keys to enter the relevant number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing mode after you end
the call.

Hold

You can place a home or cell call on hold. You hear an alert tone if you
have not taken the call off of hold after 14 minutes. You hear another
alert tone 30 seconds later. At 15 minutes on hold, the call on hold
automatically disconnects.
To place a home call on hold:
Press HOLD. Home call on hold appears and
•
To resume a home call on hold:
HOME/
• Press
To place a cell call on hold:
• Press HOLD. Cell call on hold appears and
To resume a cell call on hold:
• Press CELLULAR.

Equalizer

The equalizer feature on the handset enables you to change the quality of
the handset audio to best suit your hearing.
While on a call, or listening to a message or announcement,
press EQ to select the equalizer setting Treble 1, Treble 2,
Bass or Natural (the default setting) for the handset. The
current setting is shown on the handset for two seconds.
NOTES:
• The equalizer feature does not apply to the speakerphone on the telephone base or the
connected Bluetooth headset.
• If you switch the call between the handset and speakerphone by pressing
the audio setting remains unchanged.
• The current equalizer setting remains unchanged until a new setting is selected.
.
FLASH
HOME/
CELLULAR flashes.
45
flashes.
FLASH
/SPEAKER,