Device List And Connection; Review The Active Device List; Connect/Disconnect An Active Device - AT&T TL92271 User Manual

Bluetooth
Bluetooth setup

Device list and connection

Up to 4 devices can be paired to the telephone base. All paired devices are
shown on the device list. To use a paired device, it must be connected and in
an active slot (DEVICE 1 or DEVICE 2) on the device list. Only one Bluetooth
cell phone or a headset can be on a call at a time.
Once you have paired a device with the telephone base, you do not need
to repeat the pairing procedure again unless you delete the device from the
device list.
NOTE: When connecting a Bluetooth device to the device list, all connected devices will
be temporarily disconnected until the procedure is complete. It may take up to 2 minutes
to reconnect.

Review the active device list

1. Press MENU
CID
2. Press or
3. Press CID or

Connect/disconnect an active device

While in the active devices menu, you may connect or
disconnect your active device.
1. Press MENU
2. Press CID or
press SELECT.
CID
3. Press or
press SELECT.
CID
4. Press or
press OPTION.
5. Press CID or
(whichever is applicable), then press
The handset displays Device connected/Device
disconnected. You hear a confirmation tone.
NOTE: When your active device is connected, you are prompted to
select Disconnect. When your active device is disconnected, you are
prompted to select Connect.
on the handset when it is not in use.
DIR to highlight Bluetooth, then press SELECT.
DIR to highlight Device list, then press SELECT.
on the handset when it is not in use.
DIR to highlight Bluetooth, then
DIR to highlight Device list, then
DIR to highlight a device, then
DIR to highlight Connect/Disconnect
SELECT
to confirm.
18
Directory
Cal ler ID log
Intercom
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
1
DEVICE LIST
D1:Headset A
D2:Cel l Phone A
Cel l Phone B
BACK OPTION
1
Headset A
Connect
Remove
Rename
BACK SELECT