Display Functions - Lenovo 5594-6KX Installation And User Manual

Display functions

Press the Enter (
buttons (
button to select an option. Press the
menu.
10
Installation and User's Guide
Operation status
High Efficiency mode
Bypass mode
) button to activate the menu options. Use the two middle
and ) to scroll through the menu structure. Press the Enter (
Main menu Submenu
Measurements
Control Go to Bypass
Start battery test
Reset fault state
Restore factory settings
Reset average power
Reset cumul. power
Dry contacts test
Settings Local settings
In/Out settings
On/Off settings
Battery settings
Event log Event filter
Event list
Reset event list
Fault log Fault list
Identification
Cause
The UPS is operating on
High Efficiency mode.
An overload or a fault has
occurred or a command has
been received, and the UPS
is in Bypass mode.
button to cancel or return to the previous
Display information or Menu function
[Load] W VA A pf / [Input/Bypass] V Hz
/ [Output/Efficiency] V Hz / [Battery] %
min V n° / [DCbus] V / [Average power
usage] Wh / [Cumulat. power usage] Wh
since date
Transfers the UPS on Bypass mode
Starts a manual battery test
Clears active fault
Returns all settings to original values
Clears power usage measurements
Clears cumulated power usage
measurement
Tests dry contact relay outputs
Sets product general parameters
Sets output parameters
Sets On/Off conditions
Sets battery configuration
Selects faults, alarms and/or events to
display
Displays the events stored
Clears events
Displays event log or alarms
[Product type/model] / [Part/Serial
number] / [UPS/NMC firmware] / [Com
card IPv4], [Com card IPv6], [Com card
MAC] / [Detected accessories]
Description
The UPS is powering and
protecting the equipment.
Equipment is powered but
not protected by the UPS.
)