14
Installation and User's Guide
Submenu
On/Off settings
Sleep mode
(continued)
Remote command
Bypass standby
Available settings
Default settings
[Enabled] [Disabled]
[Enabled]
If Disabled, LCD and
communication will
turn OFF
immediately after
UPS is OFF.
If Enabled, LCD and
communication stays
ON 1h 30 min. after
UPS is OFF.
[Enabled] [Disabled]
[Enabled]
If Enabled, shutdown
or restart commands
from software are
authorized.
[Enabled] [Disabled]
[Disabled]
Define if output is
powered from Bypass
in Standby mode.