Out-Of-Range Alarm Volume - Honeywell Xenon 1900 User Manual

Paging Volume Medium

Out-of-Range Alarm Volume

If your scanner is out range of the base, an alarm sounds from both your base and scanner. If your scanner is out range of
an Access Point, an alarm sounds from just the scanner. The alarm stops when the scanner is moved closer to the base or
Access Point, when the base or Access Point connects to another scanner, or when the alarm duration expires (see
Range Delay on page 5-6). The following settings set the Out-of-Range Alarm for the base and the scanner, independent
of the volume used when scanning bar codes. Default = Base Alarm Volume Low, Scanner Alarm Volume Low.
Base Alarm Volume
Off
* Base Alarm Volume
Low
Base Alarm Volume
Medium
* Paging Volume Low
Paging Volume High
Out-of-
Scanner Alarm Volume
Off
* Scanner Alarm Volume
Low
Scanner Alarm Volume
Medium
5 - 5