Paging; Paging Mode - Honeywell Xenon 1900 User Manual

When Base Charge Off is selected, the scanner battery does not charge when the scanner is in the base cradle.
When External or Interface Cable Power is selected, the scanner battery charges from the base's external power supply, if
there is one. If there is no external power supply to the base, the scanner battery charges from the interface cable.
When External Power Only is selected, the scanner battery only charges from the base's external power supply. If there is no
external power supply, the scanner battery does not charge.
Note: If you are using a cordless charge base in
Default = External or Interface Cable Power.
Base Charge Off
External Power Only

Paging

Paging Mode

By default, the paging button on the base or Access Point pages the scanners associated with that base or Access Point. If
you want the paging button on your base or Access Point to be disabled, scan the Paging Mode Off bar code, below.
When Paging Mode is off, the base or Access Point will no longer page scanners when the button is pressed. The red LED
on the base or blue LED on the Access Point will remain lit to indicate that Paging Mode is off. (This light will go out when
the button is pressed, then back on when it's released.) Default = Paging Mode On.
Note: If you are using a Xenon 1902HC model, refer to
Page Button settings.
* Paging Mode On
Presentation Mode, External Power Only is the only setting available.
Page Button and Presentation Modes
External or Interface Cable
Power
on page 5-2 for additional
Paging Mode Off
3 - 7