Honeywell Xenon 1900 User Manual page 22

When mounted on a vertical surface, a locking system is used to secure the scanner when it is in the stand. When mounted on
a horizontal surface, the locking mechanism should be set to unlocked (pushed up). When mounted on a vertical surface, the
locking mechanism should be set to locked (pushed down).
Use 30mm screws, appropriate for the mounting surface material, to mount the base securely.
1 - 10
Locked position
for vertical mount
2.51 in. 5.31 in.
63.7mm 134.92mm
Unlocked position
for horizontal mount
2 in.
51.17mm
2.36 in.
60mm
.84 in.
21.42mm