Introduction; Symbols And Abbreviations; General; Manufacturer's Liability - DeDietrich GT 530-7 Installation And Service Manual

1 Introduction

1.1 Symbols and abbreviations

Caution danger
Risk of injury and damage to equipment.Attention must be
paid to the warnings on safety of persons and equipment.
Specific information
Information must be kept in mind to maintain comfort.

1.2 General

We congratulate you for having chosen a quality product. We
advise you warmly to read the instructions below in oder to
ensure the optimal operation of your burner. We are convinced
that it will give you complete satisfaction and meet all your
expectations.
1.2.1

Manufacturer's liability

The liability of De Dietrich Thermique SAS as the manufacturer may
not be invoked in the following cases:
1.2.2

Installer's liability

The installer is responsible for the installation and inital start up of the
appliance. The installer must respect the following instructions:
Read and follow the instructions given in the manuals provided
with the appliance.
Carry out installation in compliance with the prevailing
legislation and standards.
Perform the initial start up and carry out any checks necessary.
1.2.3

User's liability

To ensure the optimum operation of your appliance, we strongly
recommend that you abide by the following instructions:
Read and follow the instructions given in the manuals provided
with the appliance.
Call on qualified professionals to:
- Carry out installation in compliance with the prevailing legislation
and standards.
- Perform the initial start up.
- Carry out work on the appliance and the installation.
- To carry out inspections and maintenance required by a qualified
professional.
Get your installer to explain your installation to you.
25/01/2012 - 300011906-001-D
Reference
Refer to another manual or other pages in this instruction
manual.
DHW: Domestic hot water
Keep these instructions in a safe place close to the appliance.
In the interest of customers, De Dietrich Thermique SAS are
continuously endeavouring to make improvements in product
quality. All the specifications stated in this document are
therefore subject to change without notice.
- Failure to abide by the instructions on using the appliance.
- Faulty or insufficient maintenance of the appliance.
- Failure to abide by the instructions on installing the appliance.
When handing over the installation to the user, the installer will draw
the user's particular attention to the following points:
- The safety of the installation.
- The functioning of the installation and the boiler.
- Periodic maintenance to be done.
GT 530
5