Boiler Location - DeDietrich GT 530-7 Installation And Service Manual

4.3.3

Boiler location

For the assembly and because of their design, GT 530 boilers require
no special base. Their closed furnace system means that the floor
need not have refractory properties. All you have to ensure is that the
floor can support the weight of the boiler when it is fitted for operation.
Boiler body *
Straight connection (not supplied) *
* 1) In order to facilitate subsequent work on the boiler(replacing
the water distributing tube etc.) use a flanged connection from
the boiler to the system, making sure you comply with minimum
clearance dimension D.
Angled connection (not supplied)
Air inlet
Air outlet
GT GT GT
Boiler
530 530 530
-7 -8 -9
L 1305 1445 1555 1645 1755 1845 1955 2105 2245 2355 2445 2555 2645 2845 2955 3045 3155 3245 3355
M 248 265 319
C min. 300 300 300
D min. - - -
25/01/2012 - 300011906-001-D
GT GT GT GT GT
530 530 530 530 530
-10 -11 -12 -13 -14
243 297 221 275 259
300 300 300 300 300
- - - -
If the boiler location is not determined precisely, leave enough space
around the boiler to facilitate monitoring and maintenance
operations.
If A = 1.2 m (door opening side), A' = 0.5 m
If A = 0.5 m, A' = 1.2 m (door opening side): adapt the dimensions
on the basis of the dimensions of the burner when the door is open.
B = 1.5 m: adapt the dimensions on the basis of the dimensions of
the burner.
GT GT GT GT
530 530 530 530
-15 -16 -17 -18
324 269 321 265
436 436 656 656
- 136 136 356 356
GT 530
GT GT GT GT GT
530 530 530 530 530
-19 -20 -21 -522 -23
299 269 324 269 324
656 936 936 936 1266 1266 1266
356 636 636 636 966
GT GT
530 530
-24 -525
249 303
966 966
17