Release Plate; Rear Cover - Brother MP-21C Service Manual

4.2.4

Release Plate

<Disassembly>
(1) Lower the Release plate, then remove it by pulling it to the right.
4.2.5

Rear Cover

<Disassembly>
(1) Remove the screw.
(2) Remove the Rear cover by releasing the two hooks by which the Rear cover is
assembled onto the Bottom cover and then release the hook at the top of the Rear
cover.
Screw, bind M2x4
(Black)
Fig. 3.5
Hook
Fig. 3.6
III-7
Release plate
Shutter frame Hook
Rear cover
Hook