Head Pcb Assy - Brother MP-21C Service Manual
Hide thumbs
Also See for MP-21C:
- User manual (59 pages) ,
- Quick setup manual (19 pages) ,
- Service manual (233 pages)
Table of Contents
Advertisement
4.3
Head PCB ASSY
<Disassembly>
(1)
Unlock and remove the Head FFC cable (the other end is connected to the Main
PCB ASSY) from the connector on the Head PCB ASSY.
(2)
Unlock and remove the four Head FPC cables from the connectors one at a time.
(3)
Remove the Cartridge sensor connector 3P from the connector on the Head PCB
ASSY.
Head FFC
(4)
Lifting the outer edge of the PCB, remove the Head PCB ASSY while pulling the
hook securing the Head PCB ASSY outwards.
Hook
Head FPC
Fig. 3.7
Fig. 3.8
III-8
Cartridge sensor connector 3P
Head PCB ASSY
Chassis L
Ink head base unit
Head PCB ASSY
Advertisement
Chapters
Table of Contents
Troubleshooting
