Bulb Specification; Fuses And Relays - Mahindra 2016 KUV100 K2 Owner's Manual

2.5 Bulb Specification

Lamp Bulb
Head Lamp - Low Beam
Head Lamp - High Beam
Front Parking Lamp
Front Parking Lamp - DRL *
Rear Parking Lamp
Front Turn Signal Lamp
Side Turn Signal Lamp
(Fender)
High Mount Stop Lamp
Brake Lamp
Rear Turn Signal Lamp
Reversing Lamp
Front Fog Lamp *
Rear Fog Lamp *
Rear License Plate Lamp
Roof Lamp Bulb
Puddle Lamps *
* If equipped
© Copyright Mahindra & Mahindra Ltd. 012016
No. of Bulbs per
Wattage
Vehicle
55W 2
60W 2
4.5W 2
LED —
5W 4
21W 2
5W 2
21W 1
21W 2
21W 2
32W 2
21W 2
21W 2
5W 2
—
LED
2W 4

2.6 Fuses and Relays

A fuse is electric protection device. The fuse is placed in the
electrical circuit, so that when current flow exceeds the rating of
the circuit/fuse, it blows off. The element in the fuse melts, opening
the circuit and preventing other components of the circuit from
getting damaged by the over current. The size of the metal fuse
element determines the rating. Once a fuse blows off, it must be
replaced with a new one, of the same rating.
Switch the ignition and all electrical equipment OFF before touching
or attempting to change a fuse.
Replacement fuse must be with the same rating as the one you
have removed.
You can identify a blown fuse by a break in the filament. All
fuses except high current fuses are press fit.
Never touch fuses with bare hands. Always use a fuse puller to
remove and refit the fuses.
Be careful while removing the relay, do not shake or apply
excessive force to avoid damage to relay terminal.
GENERAL
2-7