Bulb Replacement - Mahindra 2016 KUV100 K2 Owner's Manual

14.12.4 Exterior
Wash and wax your car to provide an extra layer of protection to
your paint.
14.12.5 Vinyl and Rubber
Use a good conditioner on all vinyl and rubber parts to prevent from
drying out.
14.12.6 Interior
Clean the glass, shampoo the carpets, dig in between the seats to
see what's there, clean the upholstery in all nooks and corners.
14.12.7 Engine
Check all hoses and wires to make sure everything is in good
condition and replace any that need to be. The last thing to do is to
make sure the internal components of the engine remain lubricated
and don't corrode.
If the engine is being started after a very long period of non-use,
warm up the engine at an idle speed for 2-3 minutes before
driving the vehicle.
© Copyright Mahindra & Mahindra Ltd. 012016

14.13 Bulb Replacement

14.13.1 Head Lamp Bulb Replacement
The head lamp bulb can be replaced without removing the head
lamp assembly from the vehicle.
To replace the head lamp bulb;
• Ensure ignition is switched OFF
• Disconnect the head lamp connector from bulb
• Remove rear dust cover from the head lamp
MAINTENANCE
S12P19
14-23