Rapid Cabin Heating; Defogging/Demisting And Defrosting - Mahindra 2016 KUV100 K2 Owner's Manual

Table of Contents

Advertisement

If your vehicle was parked in the hot sun with all the windows
closed, drive the vehicle with windows open for the first few
minutes. This will help in venting the hot interior air out and
allow the air conditioner to cool the cabin quickly.

10.11 Rapid Cabin Heating

For rapid heating of the cabin, the following AC settings are
recommended:
Make sure that all the windows are fully closed
1.
Set the blower to maximum speed
2.
Set the air distribution control to foot mode
3.
Set air intake control to recirculation mode
4.
Set the temperature control knob to extreme right (hot)
5.
position
For dehumidified heating, switch the air conditioner ON
6.
Once the passenger compartment reaches a comfortable
temperature, the blower speed and temperature control knob can
be readjusted as desired.
© Copyright Mahindra & Mahindra Ltd. 012016
HEATING, VENTILATION AND AIR-CONDITIONING SYSTEM (HVAC)
In extreme cold weather conditions, the engine coolant takes
time to get heated up. Hence it might take a while for hot air to
discharge.

10.12 Defogging/Demisting and Defrosting

For keeping the front windshield and side windows clear, proper
control of the HVAC system is essential. Follow the instructions in
the subsequent sections to clear the frosted/misted/ fogged up
front windshield.
10.12.1 Front Windshield Defog
Set the blower to full speed
1.
Switch the air conditioner ON
2.
1 2 3
0
4
S12K06
10-9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents