Step 3-Test The Equipment - AT&T SPIRIT SPIRIT Attendant Owner's Manual

Use only a UL Listed wall plug-in
NOTE:
power transformer that has Class 2
outputs and the following characteristics:
Input rating:
0utput rating:
The power transformer
ConntecT/R has these characteristics.
Step 3 — Test the equipment.
After the SPIRIT Attendant ConnecT/R is
Installed, test the SPIRIT Attendant by placing a
call to be answered by the SPIRIT Attendant.
If you have any problems, see the Troubleshoot-
ing section of this manual for more information.
7
99-127 V AC rms 60 llz
150 mA maximum
27-35 V DC at 200 mA
14-18 V DC at 200 mA
with the
supplied
NOTE: If the caller requests the SPIRIT
Attendant to transfer a call to an extension
number that is between the valid pro-
gramed lowest and highest extension but
there is no station set plugged into that
station port, the caller will be placed on
hold and the SPIRIT Attendant will not bc
able to retrieve the call. To help prevent
this from occuring, careful attention
should be given to setting the lowest/
highest extension numbers and try to avoid
skipping over extension numbers while
assigning them.