Vello FreeWave Fusion Basic User Manual page 20

5. Plug the 3.5 mm side of the cable into the
studio flash sync jack.
6. If your studio flash has a 1/4˝ phono jack,
use the included 3.5 mm to 1/4˝ phono
adapter.
7. With your camera and Transmitter
off, loosen the Transmitter's hot-shoe
locking ring.
8. Insert the Transmitter's hot shoe into the
camera's hot-shoe mount, and tighten the
hot-shoe locking ring.
20
9. Move the Function Switch on both the
Receiver and on the Transmitter to
"Flash."
10. Confirm that the camera, Transmitter,
Receiver, and studio light are all powered
on.
11. Fully press the shutter button on your
camera. All lights connected to Receivers
operating on the same channel as the
Transmitter should fire simultaneously.