GETTING STARTED
The FreeWave Fusion Basic can perform two
major functions (with several variations):
A) It can wirelessly trigger a hot-shoe flash
or a studio flash or B) it can wirelessly
trigger a camera shutter, including single
shot and continuous shooting, long
exposures (Bulb mode), and time-delay.
When using the Fusion Basic to trigger
a flash, follow these instructions.
Note: the shutter release and flash trigger
options cannot be used simultaneously.
Mounting the Transmitter
1. With your camera and Receiver Off,
loosen the Transmitter's hot-shoe locking
ring.
2. Insert the Transmitter's hot shoe into the
camera's hot-shoe mount.
3. Tighten the Transmitter's hot-shoe
locking ring.
15