Vello FreeWave Fusion Basic User Manual page 18

5. Set the desired power output on the flash
manually.
6. Fully press the shutter button on your
camera. All lights connected to Receivers
operating on the same channel as the
Transmitter should fire simultaneously.
18
Note: We recommend using a fully manually
controlled flash with this device. The FreeWave
Fusion Basic does not transmit TTL settings, so
you will always need to set the power output
manually.
Note: If the FreeWave Fusion Basic doesn't
trigger your flash or camera on the first attempt,
try changing the channel on the Transmitter and
the Receiver using the Channel Selectors until you
find a channel that works.