Vello IR-M User Manual

Infared remote control

IR-M

INFRARED

REMOTE

CONTROL

WIRELESS SHUTTER

ACTIVATION

Introduction

Thank you for choosing Vello.

Congratulations on the purchase of your Vello IR-M infrared remote control.

This versatile remote control lets you wirelessly take photos, zoom, and

is especially useful for preventing camera shake during long exposures and for

taking self-portraits. It can also be used to trigger a remote camera when

shooting events.

from Canon, Nikon, Olympus, Sony, and Pentax.

Before using your Vello IR-M infrared remote control, please read the

following safety notices carefully and thoroughly to ensure safe use, and to

help prevent damage to your remote control or injury to yourself or others.

• Remove the battery from this product before long-term storage in order

to prevent it from leaking corrosive liquids.

• This product is not water resistant. Keep it away from rain, snow,

humidity, and general moisture.

substances such as paint thinner, benzene, or nail polish remover.

• Strong light and weak batteries may adversely affect the transmission of

the infrared signal.

• Dispose of used batteries properly. Never heat them or throw them into a

or explode.

Table of Contents

Do you have a question about the IR-M and is the answer not in the manual?

Page 1 Introduction Thank you for choosing Vello. Congratulations on the purchase of your Vello IR-M infrared remote control. This versatile remote control lets you wirelessly take photos, zoom, and is especially useful for preventing camera shake during long exposures and for taking self-portraits.
Page 2 Overview Olympus Forward Shutter (playback mode) Release Olympus Wide Angle (zoom out) Nikon Rewind Telephoto Remote Control for Multiple Cameras (playback mode) (zoom in) Sony Two-Second Delayed Shutter Shutter Releases the shutter Release Nikon after a two-second delay. Remote Control for Multiple Cameras Nikon Olympus...
Page 3: Replacing The Battery
Olympus E-system cameras, and the W/T button will not work with Pentax camera. Using Your IR-M as a Remote Trigger away. To use your IR-M as a remote trigger, turn on your camera and follow these steps: 1. Remove the plastic separator from the battery.
Page 4 ® Warranty This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date Vello provides a limited warranty that this product is free from defects in or thirty (30) days after replacement, whichever occurs later.