Trigger Your Camera For Single Shots - Vello FreeWave Fusion Basic User Manual

TRIGGER YOUR CAMERA FOR SINGLE SHOTS

1. Set your camera to single shot mode.
2. Attach the appropriate shutter release
cable to the shutter release [
the Receiver and to the camera.
3. Mount the Receiver to the camera's hot
shoe.
4. Set the Function Switch on the Receiver
to "Camera".
5. Set the Function Switch on the
Transmitter to [ ].
22
6. Hold the Transmitter in your hand with
the antenna extended.
] port on 7. Press the trigger button on the
Transmitter halfway to focus.
Confirmation LEDs on both the
Transmitter and Receiver should turn
blue.
8. Press the trigger button all the way—the
LED will turn red, and the shutter will be
triggered. The LED on the Receiver also
turns red when the shutter is triggered.