Before You Begin - Vello FreeWave Fusion Basic User Manual

BEFORE YOU BEGIN

When you remove the Transmitter and
the Receiver from the box, you will notice
a set of four small numbered switches
on the top of each instrument. These
identical channel selector switches allow
you to change the channel on which your
Transmitter and Receiver operate. Each
of the four switches has two positions.
Note: Make sure that both the Transmitter and
Receiver are set to the same channel.
You can change the channel by moving the
position of one or more channel switches
using a ballpoint pen. In this way, you can
avoid interference from any source. For
instance, if other photographers are working
in the same area as you and using radio
remote controls, you can change the channel
on your FreeWave Fusion Basic Transmitter
and Receiver so that their transmitters
don't trigger your lights, and vice versa.
2 3
5 6 7
9 0
3 4
5
4
8
2
6
13