If running Win3.1x, insert the "Win3.x Driver Disk" into your
floppy drive and run SETUP.EXE.
Follow the instructions.
When the Adaptec EZ-SCSI installation is complete, please select
the "EZ-SCSI README" option for additional information.
If running DOS, insert the "Dos Driver Disk" into your floppy
driver, change to your floppy's drive letter, and run
DOSINST.BAT. For example:
C:\>A:
A:\>DOSINST <ENTER>
Follow the instructions.
When the Adaptec EZ-SCSI installtion is complete, please select
the "EZ-SCSI README" option for additional information.