Aaeon SBC-670S Manual page 68

To update or install the driver when NetWare is already installed,
follow the instructions in this section. The procedures are
similar for all versions of NetWare. Procedures that are specific
to a NetWare version are noted when necessary.
1. Make a backup copy of the old driver (if it exists) before
installing the new driver.
2. Copy the aic7870.dsk driver from the 7800 Family Manager
Set v2.0 diskette for NetWare into the server's startup directo-
ry (e.g., c:/nwserver, c:\server.40, c:\server.312) on your hard
disk. This overwrites any existing version of the driver in the
directory.
(NOTE: For NetWare v3.1x, the aic7870.dsk file is located in
the\netware\v3_1x directory on the diskette; for NetWare v4.0
and v4.1x, the file is in \netware\v4_xx.)
3. If necessary, modify the load command line in the startup.ncf
so that the proper path to the driver and all appropriate
command line options are specified.
The correct syntax to load the 7800 Family driver is
load [pathname]aic7870[options]
Command line options are not case sensitive. Placing
commas between command line options is optional.