Aaeon SBC-670S Manual page 50

This option specifies the power conserving state that the VESA
VGA video subsystem enters after the specified period of display
inactivity has expired. The settings are Disabled, Standby, or
Suspend.
This option specifies the power conserving state that the hard disk
drive enters after the specified period of hard drive inactivity has
expired. The settings are Disabled, Standby, or Suspend.
This option specifies the length of a period of hard disk drive
inactivity. When this length of time expires, the computer enters
power-conserving state specified in the Hard Disk Power Down
Mode option. The settings are Disabled, 1 (min), 2 (min), 3 (min),
4 (min), 5 (min), 6 (min), 7 (min), 8 (min), 9 (min), 10 (min), 11
(min), 12 (min), 13 (min), or 14 (min).
This option specifies the length of a period of system inactivity
while in Full power on state. When this length of time expires, the
computer enters Standby power state. The steeings are Disabled,
1 (min), 2 (min), 3 (min), 4 (min), 5 (min), 6 (min), 7 (min), 8
(min), 9 (min), 10 (min), 11 (min), 12 (min), 13 (min), or 14 (min).
This option specifies the length of a period of system inactivity
while in Standby state. When this length of time expires, the
computer enters Suspend power state. The settings are Disabled, 1
(min), 2 (min), 3 (min), 4 (min), 5 (min), 6 (min), 7 (min), 8 (min),
9 (min), 10 (min), 11 (min), 12 (min), 13 (min), or 14 (min).
This option specifies whether date and time will be updated after
the suspend mode. The settings are Disabled or Enabled.