To update or install the Win95 driver if Windows 95 is already
installed, follow these instructions:
1. Start windows 95.
2. Click the Start button on the Windows 95 task bar, and then
point to Settings.
3. Click Control Panel.
4. Double-click the System icon.
5. On the Device Manager tab, click the plus sign next to the
SCSI controller icon.
(NOTE: If Windows 95 cannot determine the type of host
adapter installed in your computer, a yellow question mark
labeled Other devices appears instead of the SCSI controller
icon. To continue, click the plus sign next to the question
mark: a yellow question mark labelled PCI SCSI Bus Control-
ler then appears.)
6. Double-click the 7800 Family host adapter you wish to
update, or if a yellow question mark labelled PCI SCSI Bus
Controller is displayed, double-click the question mark.
7. Insert the Adaptec 7800 Family Manager Set v2.0 Diskette
into drive A:
8. Select the Driver tab.
(NOTE: If the version of Windows 95 you are using now
displays a window with a Update Driver button instead of a
Change Driver button, the remainder of your install procedure
is covered in Updating the Driver for Windows 95, Version
OSR 2, described below.)