Peripheral Setup - Aaeon SBC-670S Manual

To access Periperal Setup, select the Periperal icon in the AMI-
BIOS main menu. The following configurations are based on Fail-
Safe default settings.
AMIBIOS SETUP — PERIPHERAL SETUP
(C) 1995 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
OnBoard Serial Port1
OnBoard Serial Port2
OnBoard Parallel Port
Parallel Port IRQ
Parallel Port Mode
Parallel Port DMA Channel
OnBoard IDE
This option enables the floppy drive controller on the CPU board.
The settings are Auto, Enabled or Disabled.
This option enables serial port 1 on the CPU board and
specifies the base I/O port address for serial port 1.
The settings are Auto, Disabled, 3F8h, 3E8h, 2E8h,2F8h.
This option enables serial port 2 on the CPU board and specifies
the base I/O port address for serial port 2. The settings are Auto.
Disabled, 3F8h, 2F8h, 3E8h, 2E8h.
Auto Available Options:
Auto Auto
Auto Disabled
Auto
Auto
Normal
None
Both
ESC: Exit
Pg Up/Pg Dn: Modify
F2/F3: Color
:Sel
¯-