Table of Contents
Advertisement
This option specifies the IRQ used by the MODEM. The settings
are NA, IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, or IRQ11.
IRQ3
IRQ4
IRQ5
IRQ7
IRQ8
IRQ9
IRQ10
IRQ11
IRQ12
IRQ13
IRQ14
IRQ15
When set to Monitor, these options enable event monitoring on the
specified hardware interrupt request line. If set to Monitor and the
computer is in a power saving state, AMIBIOS watches for
activity on the specified IRQ line. The computer enters the full on
power state if any activity occurs.
AMIBIOS reloads the Standby and Suspend timeout timers if
activity occurs on the specified IRQ line.
The settings for each of these options are Monitor or Ignore.
Advertisement
Table of Contents
