3.2 Powering up the system
Insert the memory card into the DVR if not already fitted
Press and Hold power key for one second to power hold the power. Press and hold the power
key for two seconds to power off the system.
After system power on, adjust the camera viewing position again if necessary.
Trouble Shooting
PROBLEM
No camera picture
Poor picture quality
A white image appears at night
SOLUTION
The power supply adaptor
for the monitor camera(s)
is not plugged in.Camera
o u t o f r a n g e . L o c a t e
c a m e r a c l o s e r t o t h e
receiver.
Clean the camera lens.
The camera's infra-red
LEDs shine invisible light
that reflects of surfaces
such as glass causing
w h i t e l i g h t . P l a c e t h e
camera on the other side of
windows to try to improve
the night vision or place in
a well lit area.
10