Dalsa Pantera TF 11M4 User Manual page 55

Pantera TF 11M and 6M User's Manual
Command
Parameters:
i = integer
f = float
set video mode
t = tap
write user
settings
verify
temperature
DALSA
Syntax Parameters
svm i
wus
vt
Description
Set video mode. Available values are:
0: Normal operating mode
1: Test pattern Left side)
2: Test pattern Right side
3: Test pattern Both sides
4: Flip image Left side 5: Flip image Left
side Test pattern Left side
6: Flip image Left side Test pattern Right
side
7: Flip image Left side Test pattern Both
sides
8: Flip image Right side
9: Flip image Right side Test pattern Left
side
10:Flip image Right side Test pattern Right
side
11:Flip image Right side Test pattern Both
sides
12:Flip image Both sides
13:Flip image Both sides Test pattern Left
side
14:Flip imgae Both sides Test pattern Right
side
15:Flip image Both sides Test pattern Both
sides
Write all of the user settings to EEPROM
Displays the temperature of the digitizer
board and the sensor board. Condition <0ºC
or >85ºC will produce an error condition.
55
03-032-10096-05