Pantera TF 11M and 6M User's Manual
exposure time, clearing any accumulated charge gathered up to this point. An external
shutter or strobe should be used to remove light during readout
Figure 15: Mode 4 Timing
E XS YNC
Mode 6: External Frame Rate and Internal Exposure
Time
In Mode 6, EXSYNC sets the frame rate but the exposure time is set internally using the
software command,
dump that clears all charge accumulated until this point. To prevent image smearing, you
should use an external shutter or strobe to prevent light exposure during the readout
period.
Figure 16: Mode 6 Timing
EXS YNC
DALSA
E xposure Time
CD
CD
=Charge
Dump (~100µs)
(described on page 28). The exposure time begins with a charge
set
CD
Exposure Time
(set internally)
CD
=Charge
Dump
(~100µs)
F ra me P eriod
No Light
T rig gers ignored
during rea dout
Frame Period
N o Light
Readout
Triggers
ignored
during readout
27
Waiting
W aiting
03-032-10096-05