Power Unit - Epson Stylus PHOTO RX510 Service Manual

EPSON Stylus PHOTO RX500/510

4.5.6 Power Unit

1. Middle Housing Removal. (p43)
2. ASF Unit Removal. (p54)
3. Disconnect both power units and the TPU holder assembly lead from the FFC
holder on the left side of the printer.
4. Remove a screw on back of the printer, and remove the TPU holder assembly from
the power supply unit.
5. Remove two screws on back of the printer supply unit, and remove the power
supply unit from the main frame.
After replacing the power supply unit, make adjustments referring
A D J U S T M E N T
R E Q U I R E D
to the following:
Adjustment Items for Individual Units and Components (p64)
Disassembly and Assembly
C.B.P Tite 3x8,F/ZN
Tightening torque:0.6 ± 0.1 N
Disassembly and Assembly of Printer Unit
C.B.P Tite 3x8,F/ZN
Tightening torque
:0.6 ± 0.1 N
TPU Holder Assembly
Power Unit
⋅
m
C.B.S Tite R 3x6,F/ZN
Tightening torque
:0.8 ± 0.1 N
Figure 4-14. Power Unit Removal
Revision C
⋅
m
⋅
m
56