Front Frame Assembly; Front Paper Guide - Epson Stylus PHOTO RX510 Service Manual

EPSON Stylus PHOTO RX500/510

4.5.7 Front Frame Assembly

1. Middle Housing Removal. (p43)
2. Carriage Unit Removal. (p51)
3. Remove 2 screws that secure the Front Frame Assembly.
4. Remove the Front Frame Assembly from the Printer Frame.
The Front Frame Assembly shall be set at 2 convex (ìþ) places
of the Printer Frame. (Refer to the figure below.)
Lubrication required. For lubrication, refer to the following
section.
6.3.3 Lubrication Points of the Printer (p82)

4.5.8 Front Paper Guide

1. Front Frame Assembly Removal. (p57)
2. Remove the Spacer, then remove the Paper Rejection Pulley from the Paper
Rejection Roller.
3. Remove the Spacer, then remove the Paper Rejection Roller.
4. Remove one screw, then remove the Front Paper Guide from the Printer Frame.
Disassembly and Assembly
Convex place
(left side)
Convex place
(right side)
Disassembly and Assembly of Printer Unit
Figure 4-15. Front Frame Assembly Removal
Spacer
Paper Rejection
Pulley
Paper Rejection Roller
Figure 4-16. Front Paper Guide Removal
Revision C
Front Frame Assembly
C.B.S TITE 3x6, F/ZN
Tightening torque:0.8 ± 0.1 N
C.B.S TITE 3x6, F/ZN
⋅
Tightening torque:0.8 ± 0.1 N m
Front Paper Guide
⋅
m
Spacer
57